No products in the cart.
• Comes with 2-piece razor scrapers and 1 box of blades (10 piece)
• Slim and long scraper is perfect for working on hard to reach places
• Ergonomic rubbery handle offers perfect grip
• Effectively removes away stickers, decals, and other adhesives from glass, wood, and windows
• 8pcs blades are stored in the end of the handle for easy access₱249.00
• Mecete Enhanced Stair Climbing Cart has baking varnish’s surface, shining black. Maximum load: 460lb (210kg) PS: from the video you can see that our climbing cart can hold maximum load 225KG (495lb), but for your safety we recommend you do not carry load over 460 lb.! Overall Length: 30in (76cm), the handle can be extended to 43in (110 cm); Frame Width: 15.7in (40 cm). Along with the climb cart you will find ONE Bungee Cord as long as 5.2 feet, and TWO customized wrench and ONE right-angle sleeve
• With heavy duty frame, it is perfect for carrying groceries, luggage and laundry up and down stairs. Besides, this Enhance Stair Climbing Cart has 3 poles of handles, which will increase the tense and capacity. We have tested that both flat floor and stairs, our cart has 460 lbs.’ capacity. But considering one man can usually pull 150 lbs.’ cargo. We suggest that when the cargo exceed 150 lbs., please arrange 2 guys to pull the cargo. When cargo exceed 300 lbs., please arrange 3 guys to pull.
• When using our Mecete Enhanced Climbing cart to carry heavy cargo (weight more than 300 lbs.), we have prepared 2 climbing ropes for you. As you can see from the pictures, you can ask one person to pull the cart, two more persons to pull the climbing ropes which is tied to the cart. Mecete Stair Climbing Cart has a considerate design of small grip handle underneath the chassis. You can easily turn this climb cart into the tool to team lift, in case the weight of cargo is too heavy for one person
• The stair climbing wheels are made of high-quality rubber tires for smooth rolling and less noise. In order to increase the strength and guarantee service life of Mecete climbing cart, we specifically design the pulling handle to be tight enough to prevent it deviating from the frame too much when carrying heavy stuff. It may make you feel a bit hard to extract the handle during the installation.₱4,999.00
• This compact buffer has a powerful 3/4 HP motor that starts quickly and won’t stall
• Extra-long ball-bearing supported precision machined shafts
• Cast iron base for reduced vibration
• Easy access on/off switch
• 2 Buffing Wheels
• Item Weight: about 17 lbs
• Voltage: 120V-60HZ, 3/4 HP
• No-load speed: 3450/min
• Wheel Size: 200x20x16mm₱3,499.00
• Voltage: 220-240V~50/60Hz
• Input power: 1500W
• Impact energy: 5.5J
• Impact rate: 4400/min
• No-load speed: 850/min
Max drilling capacity in concrete: 32mm
1: Drilling, hammering and chiseling function
2: Chisel various-lock system
3: Anti-vibration system
4: Metal cover for tough work
• Fixes wall imperfections from 1mm to 3mm thick.
• Minimize the use of putty during application.
• Minimizes cracking and improve water resistance.
• Excellent paint compatibility.
• Improves alkali resistance.
• Imparts a luxurious smooth look.
• Ideal for high-end coatings₱349.00₱349.00
• Dutch Boy®Versatex™ is a water-based patterned finish specially designed for interior use on primed surfaces such as concrete, drywall, and properly primed wood. It can be applied in several creative patterns to beautify interior walls and ceilings.
• FINISH: Textured
• APPLICATION: For a regular texture pattern, apply Dutch Boy®Versatex™ straight from the can using a regular textured roller. If a different design is desired, first apply Dutch Boy®Versatex™ with a regular textured roller then immediately follow with the designed pattern roller while the paint is still wet and workable. Roll in one uniform direction to impress the design onto the surface.
• PRACTICAL COVERAGE:5 to 6 square meters
• DRY THROUGH:
• To touch: 2 hours to recoat: 8 to 12 hours
• THINNING SOLVENT: Do not thin. Use as supplied.
• TINTING: Do not tint. If a colored finish is desired, top coat with Dutch Boy®Nalcrete™ Latex Paints.
• CLEAN UP SOLVENT: Water
• SURFACE PREPARATION: New concrete should be allowed to dry for 14 to 28 days under normal weather conditions before paint application. Surface to be painted should be clean, dry, free from oil, grease, dust, dirt, and other contaminants. If painting must be done immediately within the 14 to 28 day curing period, treat the surface with a solution of 1-part Dutch Boy®Nalcrete™ Masonry Neutralizer 7000 diluted in 16 parts water. Apply the solution liberally using a brush or roller. Let dry overnight before rinsing with water to remove white crystal that will have formed on the surface. Let dry before painting. If the concrete has been cured for 28 days or more, there is no need to apply a neutralizer. Wooden Surfaces Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. Avoid using product on high friction areas. Drywall Substrates Install and secure joints as per₱499.00₱499.00
• PROFESSIONAL PUMP – The water pump is designed for pond, water gardens, fountains, aquariums, waterfalls, statuary hydroponic, irrigation systems and water features; It’s submersible and also can be used terrestrially, but long-time terrestrial use is NOT recommended
• PREMIUM MATERIAL – With an outer shell is made of epoxy resin with IPX8 waterproof rating; The shaft and drive ring pieces are made from ceramic material (1600 GPH/2700GPH) or silicon-carbide material (4500GPH/5300GPH/9000GPH); Abrasion-resistant meaning long-term use
• LOW ENERGY CONSUMPTION – High-performance magnetic drive motor technology leads this pump energy efficient and simple to maintain; Oil-free and quiet operation with noise levels between 30–40 DB
• OMNI-DIRECTIONAL – Direction of water can be adjusted to 5 different positions to meet different water spraying needs; Output valves fit 2 adapters that fit 1-1/4” and 1-1/2” Inner Diameter tubing and lift height can reach up to 18.1 feet
• THOUGHTFUL DESIGN – A protective mesh shield encloses the pump and keeps out large debris reduce need for maintenance; The portable handle makes it easy to move for your pumping needs; A pre-wired 20.3 feet power cord makes the pump easy to use₱2,499.00
• StudScan mode locates the edges of wood or metal studs up to 3/4 in. (19 mm) deep
• DeepScan® mode doubles the scanning depth to 1 1/2 in. (38 mm) deep
• WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
• Zircon’s patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud
• Enhanced LCD display with Target Spotlight indicates approaching stud edge and illuminates when stud edge is detected
• SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the edge of the stud
• Translucent base and illuminated “V” marker groove for more accurate marking of stud edge location
• Patented pivot pinch grip for a comfortable, secure hold in either hand, at any angle₱399.00₱399.00
• Hydraulic structure, strong pulling force, stable performance
• Aircraft aluminum shell, solid fuselage, light and easy to use
• Strong three-claw structure, one-time break, high efficiency
• Applicable to all kinds of metal sheet, pipe, cabinet, box manufacturing, industrial fastening, widely used in decoration, automobile manufacturing, container, electrical appliances, household appliances, meters, bags and machinery manufacturing industries.₱599.00